欧美黑人3p-欧美黑大硬粗免费视频-欧美黑大粗-欧美黑粗特黄午夜大片-欧美黑白配性xxxxx-欧美黑b

Brake pad Materials

 The five most important characteristics that are considered when selecting a brake pad material are as follows:
  • The material's ability to resist brake fade at increased temperatures
  • The effects of water on brake fade (all brakes are designed to withstand at least temporary exposure to water)
  • The ability to recover quickly from either increased temperature or moisture
  • Service life as traded off vs. wear to the rotor
  • The ability of the material to provide smooth, even contact with the rotor or drum (rather than a material that breaks off in chunks or causes pits or dents).

For many years straightforward asbestos was viewed as having an optimal performance in all five categories. However, as the serious health-related hazards of asbestos became apparent, other materials had to be found. Today, brake pad materials are classified as belonging to one of four principal categories, as follows:

  • Non-metallic materials - these are made from a combination of various synthetic substances bonded into a composite, principally in the form of cellulose,aramidPAN, and sintered glass. They are gentle on rotors, but produce a fair amount of dust and have a short service life.
  • Semi-metallic materials - synthetics mixed with some proportion of flaked metals. These are harder than non-metallic pads, and are more fade-resistant and longer lasting, but at the cost of increased wear to the rotor/ drum which then must be replaced sooner. They also require more force than non-metallic pads in order to generate braking torque.
  • Fully metallic materials - these pads are used only in racing vehicles, and are composed of sintered steel without any synthetic additives. They are very long-lasting, but require even more force to slow a vehicle and are extremely wearing on rotors. They also tend to be very loud.
  • Ceramic materials - Composed of clay and porcelain bonded to copper flakes and filaments, these are a good compromise between the durability of the metal pads and the grip and fade resistance of the synthetic variety. Their principal drawback, however, is that unlike the previous three types and despite the presence of the copper (which has a high thermal conductivity), ceramic pads generally do not dissipate heat well, which can eventually cause the pads or other components of the braking system to warp.[2] However, because the ceramic materials causes the braking sound to be elevated beyond that of human hearing, they are exceptionally quiet.

There are environmental factors that govern the selection of brake pad materials. For example, the bill SSB 6557  adopted in Washington State in 2010 will limit the amount of copper that is allowed to be used in friction materials, to be eventually phased out to trace amounts, because of the negative impact of high copper levels on the aquatic life. Other materials like antimony compounds will be monitored as well.

Vehicles have different braking requirements. Friction materials offer application-specific formulas and designs. Brake pads with a higher coefficient of friction provide good braking with less brake pedal pressure requirement, but tend to lose efficiency at higher temperatures, increasing stopping distance. Brake pads with a smaller and constant coefficient of friction do not lose efficiency at higher temperatures and are stable, but require higher brake pedal pressure.

2016-06-22 21:25:08
主站蜘蛛池模板: 日本a视频在线观看 | 看三级视频 | www.高清| 亚洲一级毛片中文字幕 | 高清日韩在线 | 成人精品视频在线观看完整版 | 看看的在线视频国产 | 中文字幕无线码欧美成人 | 亚洲视频在线免费观看 | 精品久久久久国产免费 | 人人艹人人干 | www.av在线免费观看 | 精品三级在线观看 | 国产做爰全免费视频美女 | 免费一级大毛片a一观看不卡 | 欧美日韩一二 | 国产理论精品 | 日本视频免费在线播放 | 国产成人一区 | 欧美特黄一级 | 欧美成人免费午夜全 | 性精品 | 久久久www成人免费精品 | 免费大片a一级一级 | 国产精品第8页 | 搜索一级毛片 | 草草影院欧美三级日本 | 亚洲国产天堂久久综合 | 成人免费一级片 | 免费中文字幕一级毛片 | 国产成人乱码一区二区三区 | 精品国免费一区二区三区 | 亚洲aaaa级特黄毛片 | 一级做a| 三级网站免费看 | 亚洲不卡在线观看 | 波多野结衣免费观看视频 | 天天操天天干天天摸 | 精品国产成人高清在线 | 日本欧美高清视频 | 国产成人在线影院 |